We have in store for our clients, a quality assured range of lighting and dimming control systems that is used to create beautiful ambience in households, hotels and rest-o-bars. Widely used in the hospitality sector, these systems are designed for ease of operation and durability.

The construction of control unit of these systems is mentioned below:

• Programming of preset scenes without the use of an Enter or Store button
• Control Units include a built-in wide angle Infrared Receiver that provide control via a separate wireless remote control transmitter (from up to 50 feet away)
• Preset lighting control for withstanding a short, as detailed in IEC/EN 60699-2-1 for abnormal conditions between load hot and either neutral or ground without damage
• Preset dimming control include RTISS (Real Time Illumination Stability System) filter circuit technology to compensate incoming line voltage variations so that there is no visible flicker with a +/- 2% change in RMS voltage/cycle and a +/- 2% Hz change in frequency/second
• Preset dimming control incorporates an air gap switch relay that is accessible without removing the faceplate
• Complies with the standards of ANSI/IEEE Std. C62.41©1980
• Tested to withstand voltage surges of up to 6000V and current surges of up to 200A without damage
• Provides power failure memory
• Faceplate is attached using no visible means of attachment

These systems are integrated with the following accessories:

• Four-scene control(s) for recalling any one of four scenes and off, plus master raise/lower
• Control for providing access for up to 16 scenes
• Wireless Infrared Transmitter(s) for recalling any one of four preset scenes and off
• Master raise/lower and transmitter to any single receiver (at least 50 feet)
• System employs common architecture for products, accessories and user interface